Is UA Storm actually waterproof?

No—UA Storm is a durable water-repellent (DWR) finish on the face fabric that sheds light rain and snow, not a waterproof membrane. For sustained rain you need a jacket explicitly labeled UA Stormproof or Gore-Tex.

How much insulation do I need for late-season treestand hunting?

Choose 60–80g PrimaLoft synthetic fill for sits in 20–40°F with a base layer and midlayer fleece. Below 20°F, UA hunting jackets lack sufficient fill—add an external puffy or choose a dedicated extreme-cold parka.

What is the difference between Ridge Reaper 1.0 and 2.0?

Ridge Reaper 2.0 uses a bonded 4-way stretch softshell face with a windproof membrane, while 1.0 is an unlined or lightly lined softshell without a membrane. For wet or windy hunts, the 2.0 is the correct pick.

Does UA Scent Control really work?

UA Scent Control uses silver-ion or zeolite treatments that reduce human odor, but effectiveness degrades after roughly 40–50 washes. Treat it as a supplemental measure and follow a full scent-control regimen rather than relying on the jacket alone.

Under Armour Hunting Jacket Buying Guide

Under Armour hunting jackets span three distinct insulation architectures—uninsulated softshell, PrimaLoft synthetic puffer, and UA Storm fleece—each tied to a specific temperature band and activity level. The primary trade-off is weatherproofing versus breathability: Storm-rated 3-layer softshells block wind and rain but trap heat during active stalks, while fleece and synthetic fills breathe better but wet out without a shell. Choose by your sit-versus-stalk ratio and expected precipitation, not by camo pattern alone.

Waterproofing:DWR (UA Storm) vs Membrane (Stormproof)Insulation Type:Uninsulated / PrimaLoft 60–80gTemperature Band:20–65°F by fill weightCamo Patterns:Ridge Reaper Barren / Forest / Raider

eBay listings

Amazon listings

Mallflare listings

At a glance

Price range: Price range not synced yet
Category: Workwear, Specialty & Vintage
Data updated: Nov 15, 2026

Current offers

No verified match right now. Browse live listings:

eBay

Amazon

Mallflare

Highlights

UA Storm DWR treatment beads water but is not a waterproof membrane—only garments explicitly labeled 'UA Stormproof' or 'Gore-Tex' carry a true 2.5L or 3L barrier against sustained rain.
PrimaLoft Gold 60g–80g synthetic fill in UA Revenant and Ridge Reaper jackets retains loft when damp and suits 20–40°F sits; uninsulated softshells below 40°F require a base layer plus midlayer grid fleece.
UA Scent Control liners use silver-ion or zeolite treatments; these degrade after roughly 40–50 wash cycles, so treat them as a wear item rather than a permanent scent barrier.
Ridge Reaper 2.0 jackets use a 4-way stretch bonded softshell face; older Ridge Reaper 1.0 and ColdGear Infrared variants have no membrane and should be layered under a true waterproof shell for wet hunts.

Best use cases

Best fit: Early-season archery or spot-and-stalk in 40–65°F—pick an uninsulated UA Storm softshell for wind resistance with breathable 4-way stretch; skip insulated puffers that overheat on the move.
Best fit: Late-season treestand sits in 20–40°F with light precipitation—choose a PrimaLoft 80g insulated UA jacket with Storm DWR and a structured hood; skip fleece-only jackets that flatten under a pack.
Best fit: Active mountain hunts with heavy rain—layer a UA Stormproof or hardshell over a grid fleece; skip water-resistant-only softshells, which wet through in 30+ minutes of steady rain.
Wrong fit: Sub-zero static sits—UA hunting lines top out around 80g synthetic fill; pair with an external puffy or choose a dedicated extreme-cold parka instead of doubling UA jackets.

Buying tips

Match fill to activity: 0–40g for active stalks above 35°F, 60–80g for treestand sits 20–40°F; anything heavier than 80g synthetic is rare in UA lines and unnecessary with proper layering.
Size for layering: order your normal size for a base-layer fit and one size up if you plan a midlayer fleece plus base; UA hunting jackets run athletically trim through the chest and shoulders.
Check the membrane label: 'UA Storm' means DWR-coated face fabric only; 'UA Stormproof' or explicit Gore-Tex branding indicates a waterproof/breathable membrane rated for sustained rain.
Verify camo generation: Ridge Reaper Barren, Forest, and Raider patterns differ by terrain; match pattern to your environment and confirm the jacket is the 2.0 or later bonded softshell if you need stretch and windproofing.

Specs

Waterproofing	DWR (UA Storm) vs Membrane (Stormproof)
Insulation Type	Uninsulated / PrimaLoft 60–80g
Temperature Band	20–65°F by fill weight
Camo Patterns	Ridge Reaper Barren / Forest / Raider

What to check before buying

Measure your chest and sleeve length against the UA size chart—athletic cut runs slim; add 2 inches of chest room for each midlayer you plan to wear underneath.
Confirm your expected temperature band and precipitation: a DWR-only softshell is wrong for all-day rain, and an 80g puffer is wrong for 60°F active hunts.
Check hood compatibility with your binocular harness and pack straps; UA hunting hoods are helmet-compatible on some models, which adds bulk for non-helmet users.
Verify camouflage pattern against your terrain (Barren for open west, Forest for timber) and ensure the jacket's scent-control liner is intact if buying used.

FAQ

All Workwear, Specialty & Vintage buying guides

Data sources: eBay / Amazon listings and product attribute feeds Data updated Nov 15, 2026.

Some links on this page are affiliate links. If you buy after clicking one, we may earn a commission at no extra cost to you. This does not change which products appear here or their order. Affiliate disclosure.